Frequently Asked Questions About YRC-RS600 Scanner and YRC-8PRO Milling Machine

Q1 After scanning with the YRC-RS600, the scan result appears as shown below. What causes this issue, and how can it be improved?

Answer：

This issue is typically caused by the scan body and the mounting putty (or adhesive material) being positioned too close together, which may interfere with data acquisition.

To improve the scanning result:

• Separate the mounting putty from the scan body.
• Position the scan body as shown in the reference image.
• Perform the scan again after repositioning.

Maintaining adequate spacing helps the scanner capture complete geometry and improves data accuracy.

Q2 Is the water pump of the YRC-8PRO covered under warranty?

Answer：

No.

The water pump is classified as a consumable component, and therefore it is not covered under the standard product warranty.

Regular inspection and replacement are recommended as part of routine equipment maintenance.

Q3 Can the YRC-RS600 scan the object shown below?

Answer:

Yes.

The YRC-RS600 can scan the object after applying an appropriate scanning spray to reduce surface reflection.

For optimal scanning performance:

Apply a thin and even layer of scanning spray.

Avoid excessive coating thickness.

Scan after the spray has dried evenly.

This improves surface recognition and data acquisition accuracy.

Q4 Can the YRC-8PRO be used with the coolant shown below?

Answer:

Yes, provided that the coolant meets the required specifications.

Since coolant brands and formulations vary across different countries and regions, there is no restriction on using a specific brand. When selecting a coolant, ensure that it:

Is suitable for dental CAD/CAM milling.

Provides effective cooling and lubrication.

Offers corrosion protection for machine components.

Does not damage seals, tubing, or the coolant circulation system.

Users are encouraged to evaluate coolant performance based on their local products and operating conditions.